450/525-570

We know that the 520/525 is more bike than most of us need. But!! It's not a matter of need, it's a matter want!! So for those brave souls that need, want or desire more, here it is. The 570 kits adds more power from bottom to top. This kit is not for the faint of heart - it is a fire breathing monster that in the right hands can be a real weapon. These kits are like adding nitrous to a 426 Hemi can you say over kill - who cares!! So if you are riding 520-525 now and think that you feel the need for more, then the 570 is the place to start.

The 570 is the next jump up and gives both great bottom to mid power gains. For those that ride in far off places where fuel may be questionable we recommend staying with 11:1 compression. The 570 can safely run 12.5:1 compression on premium pump gas as long as you are installing a stage one or greater cam at the same time. Our 13:1+ compression kits require high octane race fuel.

A KTM stroker crank can be added to any of the ktm kits which will turn the 540 kit into a 576cc motor, the 550 kit into a 588cc motor, and the 570 kit into a 600cc and for the rider that wants it all, we have a 640 fire breathing monster option (please call for specifics) The stroker crank tends to give the RFS motors a heavy feeling. We have found a way to eliminate this by lightening and rebalancing the crank.

Features:
Your stock cylinders must be sent in for boring and renikasil plating. We use an aluminum liner and renikasil each cylinder for maximum life and reliability. We have core exchange cylinders available as well. Each cylinder is honed to exact tolerances for the best fit and finish possible. We do have cores cylinders for exchange in most cases. All kits include everything needed for installation. Your cylinder bored and plated, piston kit, top end gasket set and cam chain link.

The stock cam is good for tight single track and gives the most bottom end power increase, but it will need to be short shifted to stay in the "meat of the power". A stage 1 cam will still provide excellent off idle power but is better suited for faster single track. The stage one gives slightly better overrev power and provides a very good low/mid range power improvement when added to the big bore kits. A stage 2 cam provides a strong mid range power increase. This cam is best suited for faster mx and more open style riding. The stage 3 cam is best suited for our higher compression and/or bigger displacements. The stage 4 is for the power hungry. Bottom end suffers a little, about 10% @ 2000rpm, but mid to topend power is increased dramatically and the motor gains a good amount of overrev.

The addition of a cam and or the stroker crank should be discussed with us before ordering. If you are thinking of "going big" please give our tech department a call to find which kit and combinations best fits your riding needs.

Don't want to be down for the time it takes to ship us your cylinder and perform the work?

We have a fully refundable core exchange program.  Cylinder core charge is $300 and is fully refunded as long as your core cylinder is returned within 30 days, prorating applies after 30 days.  

Please call or email for availability of core cylinders.

Option 1: Send in your cylinder and we will send you kit. Price $775
Option 2: You send us the motor to install the kit - Price: $1015 
Option 3: Core exchange - we send you kit complete in one of our cylinders for the cost of the kit and a $300 deposit on the core.  $1075 - but when you return your old core within 30 days, we will refund the entire $300.

Please choose if you would like 11:1 compression or 12.5:1 compression

Prices do not include shipping.